Kc-hilites KC #74531 Front Light Bar 2007-2011 Toyota FJ Inst User Manual download pdf

Thanks for choosing a KC HiLiTES product. We take pride in building the highest quality, best engineered

systems possible. Your satisfaction with our product is important, so if you have any questions, please call

our customer service line at 800-528-0950.

Please Read First ...

If your Toyota FJ has a TRD (Toyota Racing

Development) skid plate installed (pictured at right),

you must remove it and cut it as shown, before the light

bar can be mounted. The skid plate can be taken off by

removing the six bolts as shown in the photo.

Install the KC bar on the vehicle following the

instruction below before reinstalling the skid plate.

If you do not have the skid plate as pictured, continue

with instructions below

Hardware Included

1 - Front Light Bar 2 - Spacers

2 - Mounting Brackets 4 - 3/8” black lock nut

2 -12mm -1.75 x 70 bolts 4 - 3/8” black flat washer

2 -12mm lock washer 4 - 3/8” x 1” black bolt

Installing the Bar

1. Locate the 3 studs on the front of each frame

rail, behind the bumper cover. NOTE - These

are the 3 studs pointing forward toward the

outside.

2. Remove the nuts from each of the three studs.

NOTE - Do not discard the nuts, as they will be

reused.

3. Position the light bar brackets over the 3 studs

on each side that you removed the nuts

from.

4. Loosely install the upper nut on the left and

right studs on the front of the frame rails.

5. Locate the hole towards the rear of each light

bar bracket.

6. Place the supplied spacer between the light bar

bracket and the frame. Line up with the

rearward hole in each light bar bracket.

7. Insert and start the supplied bolt with lock washer, through the light bar bracket, the spacer and the threaded

hole of the frame.

8. Install the remaining nuts and loosely tighten all on the 3 studs on each side of the frame.

9. Loosely tighten the supplied 12 mm bolts into the frame.

10. Place the light bar between the two brackets, align the holes and push all four bolts through the bracket and

then the bar. Add the flat washers and loosely install the nuts.

11. Align and level bar and brackets, then securely tighten all bolts and nuts.

12. If you had previously removed the TRD skid plate for altering, you should now reinstall it using the six bolts that

held it initially.

13. Your DONE! ---- Install your KC lights and enjoy.

Installation Instructions for

Front Light Bar KC 74531

2007-2011 Toyota FJ

KC HiLiTES, Inc. 2843 W. Avenida de Luces, Williams, Arizona 86046-0155 * 800-528-0950 * www.kchilites.com KC3263XA - 112210

IF YOU HAVE ANY PROBLEMS

OR QUESTIONS, PLEASE CALL

CUSTOMER SERVICE AT 800-528-0950

See details on our website at

www.kchilites.com

23 Year Warranty

Cut this piece off

of both sides

Cut here

Remove all

six bolts.

TRD Skid Plate

Summary of Contents

Page 1 - 2007-2011 Toyota FJ

Thanks for choosing a KC HiLiTES product. We take pride in building the highest quality, best engineered systems possible. Your satisfaction with our

Comments to this Manuals

No comments

Kc-hilites KC #74531 Front Light Bar 2007-2011 Toyota FJ Inst User Manual

Browse online or download User Manual for For the car Kc-hilites KC #74531 Front Light Bar 2007-2011 Toyota FJ Inst. KC HiLiTES KC #74531 Front Light Bar 2007-2011 Toyota FJ Installation User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for For the car Kc-hilites KC #74531 Front Light Bar 2007-2011 Toyota FJ Inst